If there is a bike in the house there is some need to learn to fix it and do it on the run. Bikes, just like all other vehicles, have a tendency to go out of order, and most of the time it happens when you are out of the city in a dead zone where your cell doesn’t work. There are two options open to you, either to walk home or to fix the bike yourself. We think the last is a much better variant so here is what you need to know when mending your bike in the wild.

If you are without any instruments first try to see what happened. That is why you will require sprecial bike accessories If it’s the brake and you are sure of it, there is little chance to do anything about it so the best thing to do is to go and find a spot where you can call a cab or bus station from which you can get back to the city. If you have a flat tire, make sure you remember to bring your pump with you. There are excellent road and trail kits you can get. The best advice is to keep your bike in excellent condition always and then serious breakdowns will be ruled out. Go for a course in fixing your bike or learn from a friend. This will save you hundreds of dollars that you can spend any other way you like.

There is one party pooper that makes all cyclists go wild – when your bike breaks down in the middle of a long-planned hike or on the way to work. Besides, you are fed up with spending your cash on expensive repairs when you can actually learn fixing the thing yourself. Here are some tips if you agree to the first two sentences above.

You may think it’s an exaggeration but the things that happen to bikers is stuff straight from horror movies. If you have a nasty fall in the wild, crash your bike, hurt yourself and leave your cell at home you will find those bike-fixing tips pretty handy. One huge step forward for your safety and the life of your bike would be learning to fix your brakes.

First you should check if your brake pads are at the right height. Then screw the adjusting barrel all the way to let loose the cable. Loosen the holding bolt, pull the cable inner wire tight and squeeze the brake pads at the same time, then re-tighten the holding bolt. You can fine adjust the brake tension by unscrewing the adjusting barrel. This shortens the cable. And last you have to centre the brake. All this will cost a fortune when done professionally.

You can learn to fix other parts of your bike and spend less money on repairs. Moreover this will give you the confidence you need when going for longer bike trips. So get to learning today.